Keyboard - HP ENVY Notebook Maintenance And Service Manual

6. Remove the service cover (see
7. Remove the hard drive (see
8. Remove the RTC battery (see RTC battery (see
9. Remove the memory modules (see
10. Remove the WLAN module (see
11. Remove the optical drive (see
12. Remove the base enclosure (see
13. Remove the fan (see
14. Remove the system board (see
15. Remove the heat sink (see
Remove the processor:
1. Use a Torx T8 screwdriver to unlock the processor by turning the screw counter-clockwise 1/2
turn (1).
2. Lift the processor (2) to remove it from the socket (3).
Reverse this procedure to install the processor.

Keyboard

NOTE: The keyboard spare part kit includes a keyboard cable.
For use in country or region:
Backlit keyboard in black finish for non-touch models:
Service cover on page
Hard drive on page
Memory modules on page
WLAN module on page
Optical drive on page
Base enclosure on page
Fan on page 69).
System board on page
Heat sink on page
Spare part number:
34).
34).
RTC battery on page
37).
38).
41).
50).
70).
72).
For use in country or region:
Component replacement procedures
49).
Spare part number:
75