Extron electronics AXP 50 C AT User Manual page 68

To rename an output:
1. Follow steps 1 and 2 in the previous procedure.
2.
From , select the
Device View
3. The transmit tab has a column for naming the outputs. Click inside the
text box to rename an output. A cursor appears.
4. Type a new name (up to 30 characters) using any combination of letters, numbers, and
special characters.
5. Press <Enter> or click in another output
6. Repeat steps 3 to 5 for each input to be renamed.
7. When renaming is complete, close the dialog box.
tab.
Transmit
field.
Channel Label
AXP 50 C AT • Dante Configuration and Operation
Channel Label
62