Lincoln Electric RANGER SVM120-A Service Manual page 33

C-3
TIG WELDING
TIG Module (K930-1) - The TIG Module is an acces-
sory that provides high frequency and shielding gas
control for AC and DC GTAW (TIG) welding applica-
tions. It provides contactor control of constant current
welding power sources having an internal contactor.
The K930-1 TIG Module is supplied without accessories.
Arc Start switches, Amptrols, cables, torches and
mounting brackets must be purchased separately.
Docking Kit (K939-1) - For mounting the K930-1 TIG
Module on top of the RANGER 10-LX.
Control Cable (K936-1) - Control cable for connecting
the K930-1 TIG Module to a RANGER 10-LX 9-Socket
(at the TIG Module) to 14-pin (at RANGER 10-LX).
(Contains circuits 2, 4, 31, 32, 75, 76, 77 and ground.)
Arc Start Switch (K814) - A remote start switch used
in conjunction with the K930-1 TIG Module to energize
the output terminals via the TIG Module.
K812 – Hand Amptrol.
K870 – Foot Amptrol.
NOTE: TIG welding requires a Magnum™ TIG Gun,
appropriate Magnum Parts Kit and argon gas.
ACCESSORIES
SEMIAUTOMATIC FCAW AND MIG WELDING
LN-25 Wire Feeder – This portable unit provides
CC/CV for flux-cored arc welding (FCAW) and metal
inert gas welding (MIG).
LN-7 or LN-8 Wire Feeder – Semiautomatic, con-
stant speed wire feeders.
NOTE: Gas-shielded welding requires a Magnum
Gun. Gasless welding requires an Innershield Gun.
Magnum Spool Gun (K487-25) – A lightweight, semi-
automatic wire feeder for aluminum welding with
argon gas. Has built-in remote wire speed control in
the handle. Requires the K488 SG Control Module.
Includes 50 feet (15.2 meters) of power cable.
SG Control Module (K488) – Controls wire speed and
gas flow.
between the RANGER 10-LX and the K487-25
Magnum Spool Gun.
RANGER 10-LX
Provides the required control interface
C-3