Lincoln Electric RANGER SVM120-A Service Manual page 104

F-50
BRUSH REMOVAL AND REPLACEMENT (continued)
NOTE: A slight amount of darkening and wear
of the slip rings and brushes is normal.
Brushes should be inspected when a general
overhaul is necessary.
replaced, clean slip rings with a fine emery
paper.
FIGURE F.11 - BRUSH LEADS/BRUSHES RETAINED WITH CABLE TIE
1. BRACKET MOUNTING HOLES
TROUBLESHOOTING & REPAIR
If brushes are to be
200A
RANGER 10-LX
CAUTION
Do not attempt to polish slip rings while engine
is running.
219
1. BRUSHES
2. CABLE TIE
3. RETAINER CLIP
F-50