Advertisement
Quick Links
Owner's Guide and Installation Manual
Attach sales receipt to this card and retain as your proof of purchase
DATE OF PURCHASE:
MODEL NUMBER:
To register your fixture, please visit our website www.montecarlofans.com
4LMR56XXXD Series Fan
cETL Model NO. : 4LMR56XXXD
RETAILER NAME:
RETAILER ADDRESS:
7.4 kg
16.28 lbs
Total fan weight with light
Advertisement
Related Manuals for Monte Carlo Fan Company 4LMR56 D Series
Summary of Contents for Monte Carlo Fan Company 4LMR56 D Series
- Page 1 Owner’s Guide and Installation Manual 4LMR56XXXD Series Fan cETL Model NO. : 4LMR56XXXD Attach sales receipt to this card and retain as your proof of purchase DATE OF PURCHASE: RETAILER NAME: RETAILER ADDRESS: MODEL NUMBER: To register your fixture, please visit our website www.montecarlofans.com 7.4 kg 16.28 lbs Total fan weight with light...
-
Page 2: Cautions And Warnings
Cautions and Warnings WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING READ AND SAVE THESE INSTRUCTIONS Installation work and electrical wiring must be done by qualified person(s) in accordance with applicable codes and standards (ANSI/NFPA 70), including fire-rated construction. - Page 3 Mounting bracket Canopy Canopy ring Before you begin installing the fan, Switch Before installing this fan make sure the Remove decorative ring from canopy by turning counterclockwise. power off at Service panel and lock outlet box is properly installed to the service disconnecting means to prevent house structure.
-
Page 4: Safety Cable Installation
SAFETY CABLE INSTALLATION Lag screw Cross pin Keeper pin Safety cable Slot Washer Lock washer Slip downrod into motor housing yoke, Install ball end of downrod into mounting For Canadian installation and for USA fan aligning holes and install cross pin and bracket opening. - Page 5 This side up Blade Blade supporting plate Groove Plate on motor Lift Canopy, aligning the key holes with Insert blade into the slot on flywheel. Loosen 2 and remove 1 preassembled the preinstalled screws on canopy and Install blade with a blade supporting plate screw from the plate on motor.
- Page 6 LED light Outer light shade fixture Inner light shade Rubber washer Hex nut Finial Connect white wire from fan to white wire Align the hole on inner light shade with Raise outer light shade, aligning threaded from LED light kit and then connect blue the threaded rod on light fixture and rod on light fixture with the hole in middle (or black) wire from fan to black (or blue)
- Page 7 Remote Controller Operation Remove the battery cover from the remote control transmitter and install batteries. Replace the cover. This remote uses 2 1.5V/AAA batteries. Note: If not using for long periods of time, remove battery to prevent DIM (D) damage to remote transmitter, and store the remote transmitter away from excess heat or humidity ON/OFF (O) Dimming, Non Dimming Setting (Only available for fans with light)
- Page 8 Install Transmitter wall mount cradle with 2 screws provided. Useful tips: Take remote transmitter up by pushing it at lower area of the transmitter. The remote transmitter can be held on magnetic metal materials by a magnet built in the transmitter. Wall mount cradle The receiver provides the following protective functions Lock protection- The DC motor has a build-in safety feature...
-
Page 9: Troubleshooting
Trouble Shooting or wiring. In some cases, these installation errors may be mistaken for defects. If you experience any faults, installation, please call our Customer Service Center at the number printed on your parts list insert sheet. Warning means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel. - Page 10 Mar.2020...
Need help?
Do you have a question about the 4LMR56 D Series and is the answer not in the manual?
Questions and answers