Table of Contents
Advertisement
All Safety Shields, Guards and Safety devices including (but not
limited to) - the Deflectors, Chain Guards, Steel Guards, Gearbox
Shields, PTO integral shields, and Retractable Door Shields should
be used and maintained in good working condition. All safety
devices should be inspected carefully at least daily for missing or
broken components. Missing, broken, or worn items must be
replaced at once to reduce the possibility of injury or death from
thrown objects, entanglement, or blade contact.
Grass Flail
•
The Grass Flail head is rated for cutting grass
only.
•
The Grass Flail operates attached to the boom
arm, and is ideal for cutting hard to reach
areas where a smooth cut is required.
•
Cutting height ranges from 3/4" to 4" in
vegetation. Cutting height is set by adjusting
the height of the roller assembly.
•
When operating near the ground or when
mulching be particularly careful that there are
no bystanders or animals with a 100 yards.
Debri tends to fly out at great speed and can
injure or even cause death.
OPS-B- 0040
Flail
•
The Flail Brush Cutter is rated to cut material
up to 4" in diameter.
•
Setting cutting height ranges from 3/4" to 6".
Cutting height is set by adjusting the height of
the roller assembly.
•
Remove roller assembly when cutting limbs
and other large diameter vegetation (greater
than 2") to prevent damaging the roller
assembly.
•
When operating near the ground or when
mulching be particularly careful that there are
no bystanders or animals within a 300 feet.
Debri tends to fly out at great speed and can
injure or even cause death. OPS-B- 0042
A-BOOM 02/10
©2010 Alamo Group Inc.
OPERATION
Operation Section 3-38
(SGM-3)
Advertisement
Table of Contents
