Alamo Industrial A-Boom Operator's Manual page 19

Boom arm mower
Hide thumbs Also See for A-Boom:
Table of Contents

Advertisement

Be particularly careful in transport. The Mower has raised the center of
gravity for the tractor and has increased the possibility of overturn.
Turn curves or go up slopes only at low speed and using a gradual turning angle. Slow
down on rough or uneven surfaces.
When transporting Boom Mower on a truck or trailer, the height or width
may exceed legal limits when the boom is in the transport position. Con-
tact with side or overhead structures or power lines can cause property
damage or serious injury or death. If necessary lower boom to reduce
height and/or remove mowing head to reduce width to the legal limits.
8)
Never operate the Tractor and Mower Unit without an OPS (Operators
Protective Structure) or Cab to prevent injury from objects thrown from
ground or from overhead trimming. Stop mowing if workers or passersby
are within 300 feet.
The Joystick Master Control Switch must be OFF to prevent accidental movement of the
boom and cutting head whenever the mower is not being operated.
Secure the boom and mower head in the transport position before traveling on public roads.
Never transport on public roads with the boom and mower head extended. Always disen-
gage and lock out the hydraulic controls for the boom mower before transporting. Inadver-
tent boom movement on public roads may contact with other vehicles resulting in serious
bodily injuries or even death.
Make certain that the "Slow Moving Vehicle" (SMV) sign is installed in
such a way as to be clearly visible and legible. When transporting the
Equipment use the Tractor flashing warning lights and follow all local traf-
fic regulations.
A-BOOM 02/10
© 2010 Alamo Group Inc.
SAFETY
(SBM-3)
(SBM-9)
(SBM-21)
(SG-6)
Safety Section 1-15
(SBM-
(SBM-16)

Advertisement

Table of Contents
loading

Table of Contents