Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2014 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
read this material before using this product.
Failure to do so can result in serious injury.
SaVe tHiS ManUaL.
reV 15f
Need help?
Do you have a question about the 62368 and is the answer not in the manual?
Questions and answers
My screen on the bunker hill model 62368 is blank
The screen is blank on the Bunker Hill Security model 62368 because either the camera is disconnected or it is out of range of the receiver.
This answer is automatically generated
My Bunker Hill Security 62368 does not want to record. I put a new sd card in and formatted it and it will not record
If your Bunker Hill Security 62368 is not recording after replacing and formatting the SD card, the issue may be related to one of the following:
1. SD Card Error: Ensure the SD card is properly inserted. If "Err" still appears on the screen, reformat the card again or try using a different SD card.
2. Recording Settings: Check if the system is set to record. Ensure that manual recording, motion detection, or scheduled recording is activated as needed.
3. Power Failure: If a power failure occurred recently, verify that the system restarted correctly. The Receiver may need to be manually set to recording mode.
If these steps don’t resolve the issue, further troubleshooting may be required.
This answer is automatically generated
Does the camera Item 62368 support computer connectivity.?
How do I reformat my card