Connecting A/V Output - Bunker Hill Security 62368 Owner's Manual & Safety Instructions

Menu > Settings
1. Touch then select Settings.
2. Date & time: Set date and time, then touch Ok.
note: Time is in 24 hour format.
3. Video Output: Select ntSC, then touch Ok..
4. Format Memory: Select yes or no, then touch Ok.
CaUtiOn: touching Ok while yes is selected
will erase all files from the Micro SD Card.
Menu > Detect
1. Touch then select Detect.
2. Select Camera, then touch Ok.
Menu > Brightness
To control the brightness of each Camera.
1. Touch to select a Camera.
2. Touch then select Brightness.
Menu > Screen Saver
To conceal the fact that the Receiver is a Security System.
1. Touch then select Screen Saver.
2. Select Blank Screen for a blank screen
or select photo Frame to add your
own image(s), then touch Ok.
note: To add your own image(s), see
Using Screen Saver on page 14.
Menu > pairing
When adding Cameras, they will need to be programmed manually (paired) to work with the Receiver.
1. Before installing Camera(s):
a. Connect the Power Adapter's cord
to the Camera's Power cord.
b. Plug the Power Adapter into a 120VAC outlet.
c. Determine which Channel is available to use.
d. Touch then select pairing.

Connecting a/V Output

To view on another device, such as a television.
1. Connect black plug of RCA Cable into
aV Out port on back of Receiver.
Item 62368 For technical questions, please call 1-888-866-5797.
5. alarm Volume: Touch
Touch to decrease volume, then touch Ok.
V
note: This function also controls the
volume when using aV Output.
6. auto Mute: To mute Cameras when sound level
is low. Select On or OFF, then touch Ok.
7. Default Settings: To return all Settings to factory
default settings. Select yes or no, then touch Ok.
3. Select Sensitivity Settings, then touch Ok.
4. Repeat steps for other Cameras.
3. Touch to increase brightness.
V
Touch to decrease brightness, then touch Ok.
V
4. Repeat steps for other Cameras.
3. photo Frame:
a. transition timing: Select the amount of time
each image will display, then touch Ok.
b. transition Options: Select the way the
images will transition, then touch Ok.
e. Select the Channel.
f. Press and release the Pair Button
on the back of the Camera.
2. Install Camera(s) according to
Mounting on page 9.
2. Connect white and yellow plugs into
corresponding inputs on device.
3. Press and release
aV
to increase volume.
V
to view on device.
Page 11