Table of Contents
Advertisement
Setting Up
Setting the display
You can make settings for menus, messages, and the background display in Display from the Configuration menu.
Press [Menu] button > Extended > Display
You can make the following settings in Display.
Operation
Change the menu display position.
Do not display messages on the projection screen such as
the source name when the source is changed, or warnings
such as when the internal temperature rises.
Change the background screen display.
To prevent accidental operations, a confirmation message
is displayed asking if you want to turn off the projector
when you press the [t] button on the remote control.
*1 Displays operation and movement dialogs, lamp replacement messages, Message Broadcasting exiting messages, and the projector ID.
*2 When A/V Mute Release is set to A/V Mute, Black is set.
Select the position in Menu Position.
Set Messages to Off. (Default: On)
You can check warnings from the indicator status.
*1
s "Reading the Indicators"
You can select Blue, Black, or Logo. If no logo has been registered, the Epson logo is displayed.
Display Background: Set the screen background when no image signal is available. (Default: Blue)
Startup Screen: When the projector is turned on, set On to display the user's logo or Off. (Default: On)
A/V Mute: Set the screen displayed
Set Standby Confirmation to On. (Default: Off)
Settings
p.16
*2
when A/V mute is enabled. (Default: Black)
32
Advertisement
Table of Contents
