Base - Epson EB-G6800 Installation Manual

Hide thumbs Also See for EB-G6800:
Table of Contents

Advertisement

Part Names and Functions
Name
J
Audio Out port
Outputs audio from the currently projected image to an
external speaker.
K
Outputs to an external monitor the analog signal from the
Monitor Out port
computer connected to the Computer port or the BNC
port. You cannot output signals input from other ports or
component video signals.
L
DisplayPort
Inputs video signals from DisplayPort compatible
computers. This projector is compatible with HDCP.
M
Inputs video signals from HDMI compatible video
HDMI port
equipment and computers. This projector is compatible
with HDCP.
N
Audio3 port
Inputs audio from equipment connected to the
DisplayPort or the HDMI port.
O
Connects a LAN cable to the optional HDBaseT
HDBaseT port
Transmitter. s
P
Connects a LAN cable to connect to a network.
LAN port
Q
Inputs SDI signals from a video equipment. This projector
SDI port
(EB-G6900WU only)
supports SD-SDI (Standard Definition) and HD-SDI
(High Definition).
R
Service port
Control port used when updating the projector's software.
This should not normally be used.
Function
p.41

Base

Name
A
When setup on a surface such as a desk, extend the foot to
Front adjustable foot
adjust the position of the image. s
B
Rear feet
When setup on a surface such as a desk, turn to extend and
retract to adjust the horizontal tilt. s
C
Screw holes to fix the cable cover in place. s
Screw holes to fix the
cable cover
D
Pass a commercially available wire lock through here and
Security cable
installation point
lock it in place. s
8
Function
p.24
p.25
p.42
p.77

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eb-g6800wu

Table of Contents