Projecting Using A Qr Code; Setting The Display Method For Qr Codes - Epson EH-TW570 User Manual

Projection Functions
You can set whether to repeat the Slideshow.
Continuous
Play
You can set the time for a single file to be displayed in
Screen Switch‐
Slideshow. You can set a time between No (0) to 60
ing Time
Seconds. When you set No, auto play is disabled.
Effect You can set the screen effects when changing slides.
c
When you have finished making settings, use the [
or [ ] buttons to position the cursor over OK, and then press the
[ ] button.
The settings are applied.
If you do not want to apply the settings, position the cursor on
Cancel, and then press the [

Projecting Using a QR Code

By reading a QR code displayed on the projected screen with Epson
iProjection (V1.3.0 or later), you can easily project data on a smartphone or
tablet device.
Check the following points before starting projection using a QR code.
• The supplied or optional wireless LAN unit is installed on the projector
• Wireless Power is set to Wireless LAN On from the Configuration
menu
a
You can download Epson iProjection for free from the App Store or
from Google play. Any fees incurred when communicating with the
App Store or Google play are the responsibility of the customer.
], [ ], [ ],
] button.

Setting the display method for QR codes

Set the QR code display from the Configuration menu.
a
Press the [Menu] button.
"Using the Configuration Menu"
s
Using the remote control
b
Select Network Configuration from Network.
c
Select Display LAN Info. from Basic.
63
p.82
Using the control panel