Projecting Images
Operations
a
Select Corner Wall from Geometric Correction.
b
Select Corner Type.
c
To fit the projected image to the projection position, select
Horizontal Corner or Vertical Corner, and then press the [
button.
When the surfaces line up horizontally
Select Horizontal Corner.
When the surfaces line up vertically
Select Vertical Corner.
From here on, steps are explained using Horizontal Corner as an
example.
d
Press the [Esc] button, and then select Correct Shape.
e
Adjust the position of the projector and the lens shift so that the
line in the center of the screen matches the corner (the point
where the two surfaces meet).
"Adjusting the Position of the Projected Image (Lens Shift)"
s
p.22
]
a
Each time you press the [
image and the grid.
f
Use the [
], [
want to adjust, and then press the [
] button, you can show or hide the
], [ ], and [ ] buttons to select the area you
] button.
57