Table of Contents
Advertisement
Installing the Projector
Adjusting the Horizontal Tilt (When Setup on a
Desk)
Extend and retract the rear feet to adjust the projector's horizontal tilt.
A
Extend the rear foot.
B
Retract the rear foot.
Attention
The rear feet can be attached and removed. Note that the feet will detach if
they are extended more than 10 mm.
Screen Settings
Set the Screen Type to 4:3, 16:9, or 16:10 according to the aspect ratio of
the screen being used
Press [Menu] button > Extended > Display > Screen > Screen Type
The area where the image is displayed matches the shape of the screen.
a
The default values are shown below.
EB-G6900WU: 16:10
EB-G6800: 4:3
You do not need to set the Screen Type when the default value is the
same as the aspect ratio for the screen being used.
Adjusting the position of the image on the projected screen
You can adjust the position of the image if there are margins between the
edge of the image and the projected screen frame due to the Screen Type
setting.
Press [Menu] button > Extended > Display > Screen > Screen Position
Example: When the Screen Type is set to 4:3 for EB-G6900WU
You can move the image to the left and right.
a
The Screen Position cannot be adjusted in the following situations.
• If the Screen Type is set to 16:10 when using EB-G6900WU
• If the Screen Type is set to 4:3 when using EB-G6800
25
Advertisement
Table of Contents
