Projecting Images
Image Maintenance
Panel Alignment
Adjusts the pixel color shift for the LCD panel. You can adjust the pixels
horizontally and vertically by 0.25 pixels within a range of ±1 pixel.
Perform this in Panel Alignment from the Configuration menu.
Press [Menu] button > Extended > Display > Panel Alignment
a
• Image quality may decline after performing Panel Alignment.
• Images for pixels that extend beyond the edge of the projected
screen are not displayed.
The following screen is displayed.
Operations
a
Enable Panel Alignment.
(1)
Select Panel Alignment, and then press the [
(2)
Select On, and then press the [
(3)
Press the [Esc] button to return to the previous screen.
b
Select the color you want to adjust.
(1)
Select Select Color, and then press the [
(2)
Select R (red) or B (blue), and then press the [
(3)
Press the [Esc] button to return to the previous screen.
c
Select the grid color displayed when making adjustments from
Pattern Color.
(1)
Select Pattern Color, and then press the [
(2)
Select a combination of R (red), G (green), and B (blue) for the grid color.
R/G/B: Displays a combination all three colors; red, green and blue. The
actual color of the grid is white.
R/G: This is available when R is selected from Select Color. Displays a
combination of two colors; red and green. The actual color of the grid is
yellow.
G/B: This is available when B is selected from Select Color. Displays a
combination of two colors; green and blue. The actual color of the grid is
cyan.
(3)
Press the [Esc] button to return to the previous screen.
d
Select Start Adjustments, and then press the [
the message is displayed, press the [
Adjustment starts. All four corners are adjusted in order starting at
the top left.
70
] button.
] button.
] button.
] button.
] button.
] button. When
] button again.