Battery
Battery Installation
1. Before installing the battery, make sure it's fully charged and clean.
2. Slide the battery into position in the battery tray with positive (+) terminal to rear of motorcycle.
3. Connect the positive ( + ) battery cables, tighten securely and install the red boot.
4. Connect the negative ( - ) cables, tighten securely. Be sure cables have adequate side cover clearance.
Caution
• Connecting the negative cable first can produce an electric shock that could result in damage or injury.
• Connecting the battery cables to the wrong terminals can severely damage the electrical system.
5. Reinstall the battery cover (A).
6. Reinstall the left side cover.
MAINTENANCE
A
127