Starting Up Applications; Adjusting The Screen Size - Clarion NX604 Owner's Manual

(For Android smartphones)
1. Set "Android" for "Device Type" on the
Settings menu.  P.44
2. Start Smart Access on the
smartphone.
3. Set "Usage Setting" in "BT Devices
Connection" on the Settings menu,
and then connect your smartphone
via Bluetooth.  P.31
4. Connect the unit to the smartphone.
The following two connection methods
are also available for some smartphones.
1. For MHL connection Connect to the
cigarette lighter port,
etc. on the vehicle to
supply power.
The unit
HDMI cable HDMI conversion cable
(sold separately) (commercially available
product)
2. For HDMI connection
The unit
HDMI cable
(sold separately)
Attention
• Use only an HDMI conversion cable that
supports EDID transfer.
5. Start the application on the unit.
36 NX604/FX503

Starting up applications

Notice
• The unit sometimes does not support
smartphone multi-touch or flicking
functions.
• Applications cannot be added or deleted
from the unit. Execute addition or deletion
of applications on the smartphone.
• During Smartphone linking, do not set
the smartphone to a sleep state. Doing
so might prevent the smartphone from
functioning properly.
MEMO:
• When Smart Access is used for the first
time, the Terms of Use confirmation
screen is displayed. Check the terms of
use, and touch Check .
• "!" will be displayed when there is a
new version of Smart Access available.
To update Smart Access, remove the
smartphone from the unit, and execute
the update by operating the application on
the smartphone.
1
MENU
Smart Access
Start up Smart Access. The list of
linking-related applications installed
on the smartphone is displayed.
When an application is started up
on the smartphone, the screen is
switched to the application screen.
2
Select the application you want
to start up.
The application starts up. The
application can be operated from
screens on the unit as if you are
operating the smartphone.
Touch MENU Smart Access to
return to the application list screen.

Adjusting the screen size

(Android smartphones only)
During Smartphone linking, the left and
right, or top and bottom of the screen
sometimes displays black because of
different resolutions on the unit and the
smartphone. The screen size can be
corrected by the following procedure.
Notice
• If you cannot touch , update Smart
Access on the smartphone.
1
During Smartphone
Smart Access
linking
(long press).
The side menu is displayed.
2
:
The screen returns to the
application list screen.
:
The screen returns to the previous
screen when the screen is not
displayed the application list
screen.
:
This hides the side menu.
3
Adjust the screen size.
:
This reduces the height of screen
size.
:
This increases the height of screen
size.
:
This reduces the width of screen
size.
:
This increases the width of screen
size.
Reset to Factory Setting:
This resets the screen size after
correction to their factory settings.
Back:
This cancels the settings and
displays the application list screen.
4
OK
5
Check
After adjusting the screen size, go
on to correct the touch position on
screen.