Smartphone Linking - Clarion NX604 Owner's Manual

Cannot connect.
Audio is not played.
The track name, artist name and
album name are not displayed.
Sound is no longer output from the
connected audio device.
Correctly connect the Bluetooth-compatible
device.  P.31
Turn the audio device on.
The unit sometimes cannot be connected
or skipping sometimes happens depending
on distance and where the Bluetooth audio
is installed. Situate the audio device so the
reception is as good as possible.
Use audio devices that are compatible with
AVRCP.
Cancel the connection and reconnect.
Start up the player for the connected audio
device.
Use audio devices that are compatible with
AVRCP Ver.1.3. Restart the player on the
Bluetooth audio device side.
Specify the Bluetooth audio device again from
the portable device's setting screen.

Smartphone linking

Symptom
An error message is displayed and
Smartphone linking is not possible.
Applications cannot be updated even by
touching "!" on the Smartphone linking
screen on the unit.
The Smartphone linking screen is not
displayed, the screen is black, or an error
message appears.
The error screen is displayed in the
Smartphone linking screen after an
outgoing call is made.
Remedy
Cancel the sleep state on the smartphone.
Install the linking-compatible application and
application management software "Smart
Access" on the smartphone beforehand.
Start up the linking-compatible application on
the smartphone beforehand.
Reconnect the smartphone in a place with
good reception.
Disconnect the connector cable and
reconnect it.
Check the OS setting on the unit.
In the case of Android smartphones, enable
the HDMI output setting on the smartphone.
Next, check what resolutions of HDMI output
are possible on the unit.
Also, check to see if the smartphone supports
Bluetooth SPP and HID profiles.
For reasons of safety, the application cannot
be updated during Smartphone linking.
Disconnect the connector cable and update
the application on the smartphone.
Check to see if the connector cable is
connected properly.
In the case of Android smartphones, check
to see if the HDMI output resolution of your
smartphone can be displayed on the unit.
In some versions of the smartphone OS,
Smartphone linking is sometimes canceled
after an outgoing call is made.
Start up Smart Access from the Home screen
by operating on the smartphone.
NX604/FX503 47