Using Cellphones; Screen During A Telephone Call; Entering A Number To Make A Call; Making Calls From The Outgoing/Incoming Call Log - Clarion NX604 Owner's Manual

Using cellphones

Attention
• Do not leave cellphones inside the vehicle.
The inside of the vehicle gets hot under
the blazing sun, for example, and might
cause them to malfunction.

Screen during a telephone call

The following screen is displayed during a
telephone call:
Screen during a telephone call
:
This displays the option screen.
:
This mutes the phone outgoing volume.
:
This switches to telephone calls on the
cellphone unit.
Private call operation is sometimes not
switched to depending on the cellphone
you are using.
:
This ends the telephone call.
:
When the number entry screen is
displayed, enter the numbers for the
password, etc. during the telephone call.
Touching returns the screen to the
previous screen.
Pressing NAVI AV during a telephone call
switches the screen as follows. With this
screen displayed as it is, operations such
as searching for a destination can be
performed. (NX604 only)
Map screen during a telephone call
The call is disconnected and the
current position is displayed.
The call time, name of
other party or telephone
number is displayed.
This switches to telephone calls on the
cellphone unit.
This toggles the telephone control bar
between display and hide.
MEMO:
• With some cellphone models, incoming
calls are automatically rejected when
there is an incoming call from a third party
during a telephone call. The incoming call
log is not saved.
• When the vehicle moves outside the
cellphone service area during a telephone
call (i.e.to an area where radio waves
cannot be received), the line will be
disconnected.
• During hands free telephone calls, the
audio source cannot be switched or
selected.
• It may not be possible to make or receive
calls unless the cellphone is in standby.
Entering a number to make a
call
Attention
• While you are driving, you cannot enter
telephone numbers to make a call. Always
stop at a safe location before making a
telephone call.
Notice
• Always input the area code when calling a
land-line phone.
• With some cellphones, you may not be
able to redial immediately after hanging
up a call you dialed. Wait a while before
dialing the number again.
1
MENU Phone
2
Enter the telephone number.
3
The telephone number is dialed and
the other party is called.
:
The call is stopped if this is
touched while you are calling the
other party.
4
To end a telephone call
This disconnects the call and returns
you to the screen before you made
the call.
The telephone number you called,
name (when registered to the
phonebook) and dial date/time are
saved as the outgoing call log. Only
the latest call log is shown for the
same phone numbers.
Making calls from the
outgoing/incoming call log
Notice
• You cannot make calls from the incoming
call log when the incoming call was from a
withheld number.
1
MENU
Phone
2
3
or
4
Select the other party you want
to dial.
5
Call
The registered telephone number is
dialed and the call is made.
MEMO:
• The last ten calls recorded on the unit are
displayed in the incoming/outgoing call
log.
• In the case of telephone numbers
registered to the phonebook, the
registered names are displayed.

Deleting the incoming/

outgoing call log

1
MENU Phone
2
3
or
4
Delete All
NX604/FX503 33