Canon IB4000 series Online Manual page 152

Important
• You cannot insert the ink tank in the wrong position. Check the label under the installation
position, then install the ink tank in the correct position.
5. Push the ink tank until it snaps firmly into place.
6. Press the OK button to select [OK]Exit.
If [OK]Next is displayed on the screen, it means there is another ink tank that can be replaced.
If you want to replace this ink tank, press the OK button and then repeat procedures from step 2.
To exit the ink tank replacement, press the OK button until [OK]Exit is displayed on the screen.
The print head holder moves to the standby position. You cannot remove the ink tank while at this
position.
Important
• You cannot print unless all the ink tanks are installed. Be sure to install all the ink tanks.
• An installed ink tank cannot be removed until the message to replace it is displayed.
7. Close the front cover.
152