Quick Start; What's Inside The Stealth Sp-1 (Block Diagram) - Emotiva Stealth SP-1 User Manual

Stealth SP-1 Input Selector and Phono Preamp

Quick Start

Even though you may be eager to try out your Stealth SP-1 right away, there are a few
important details you need to check first:
1) Remove the insulator tab from the batteries in the remote control. (See Inserting
or changing batteries in the remote control in the Hardware Configuration section for
details.)
2) If you're using the SP-1 with our Stealth DC-1, or another DAC with an analog input,
verify that your DAC is configured to provide a variable level output.
WARNING!: THE STEALTH SP-1 MUST BE USED IN CONJUNCTION WITH A
DAC OR PREAMP WHICH INCLUDES A VOLUME CONTROL, OR WITH OUR
CONTROL FREAK PASSIVE VOLUME CONTROL. The Stealth SP-1 switches
the selected input directly to the output at full level - with no attenuation.
Connecting the SP-1 directly to a power amp without a volume control may
result in excessively loud output levels, which may present a risk of hearing or
equipment damage.
3) Remember to turn on the rear panel Power switch on your Stealth SP-1 (and turn on
the rear panel Power switch on your DC-1 if you're using one).
What's Inside the Stealth SP-1
(Block Diagram)
ANALOG
INPUTS
PHONO
LINE
LEVEL
PHONO
INPUT
PREAMP
AC POWER INPUT
CONTROL
RELAYS
POWER SUPPLY
Page 5
OUTPUT