Care And Maintenance - Emotiva Stealth SP-1 User Manual

Stealth SP-1 Input Selector and Phono Preamp

Care and Maintenance

Periodic Maintenance
Your Emotiva Stealth SP-1 requires no periodic maintenance or calibration.
Cleaning the Cabinet and Front Panel
• The cabinet of the SP-1 should normally be cleaned with a rag dampened with plain
water. DO NOT spray water directly onto or into the SP-1, or into the connectors or
volume control and encoder, and DO NOT use abrasive or chemical cleaners. Gently
dry the surface with a clean soft rag after cleaning.
• If necessary, use a mild detergent, wipe the surface with a rag dampened with plain
water to rinse it, then gently dry the surface with a clean soft rag.
• If something nasty does get on the sides or top of your SP-1, use a rag dampened
with a weak solution of dish detergent or other mild cleaning liquid, followed by a
rag dampened with plain water, and dry with a clean rag.
• If it appears that liquid may have spilled into the vents, plese disconnect power to
the Stealth Sp-1 immediately and contact Emotiva Technical Support.
Page 13