Emotiva Stealth SP-1 User Manual page 4

The power cable for the Stealth SP-1 should be unplugged from the outlet during severe
electrical storms, or when unused for a long period of time.
Only replace the fuse(s) in the Stealth SP-1 with a fuse(s) of proper value and voltage rating.
The Stealth SP-1 should only be cleaned as directed in the manual. Avoid spraying liquids
directly onto the unit and NEVER spray liquids into the vents or controls, or directly onto the
face plate. Care should be taken so that small objects do not fall into the inside of the unit.
You should seek service for your Stealth SP-1 by qualified service personnel if any of the
!
following occur:
1. The power-supply cord or the plug has been damaged.
2. Objects or liquid have fallen or spilled into the vents.
3. The unit has been exposed to rain.
4. The unit exhibits a marked change in performance.
5. The unit has been dropped, or its enclosure or chassis is damaged.
NOTE: TO COMPLETELY DISCONNECT THE STEALTH SP-1 FROM THE AC POWER
MAINS, DISCONNECT THE AC POWER CORD FROM THE AC RECEPTACLE.
NOTE: THE POWER CORD ON THE STEALTH SP-1 MUST REMAIN READILY
ACCESSIBLE AT ALL TIMES.
CAUTION
CAUTION: TO REDUCE THE RISK
OF ELECTRICAL SHOCK, DO
NOT REMOVE COVER. NO USER
SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.