Specifications - Emotiva Stealth SP-1 User Manual

Stealth SP-1 Input Selector and Phono Preamp

Specifications

Line Level Analog Inputs
Line level analog inputs on the SP-1 are switched using precision control relays.
This signal path is entirely passive, and so introduces virtually no additional noise or
distortion to the analog signal. The signal level and source impedance are determined
solely by the source device.
Phono Input
Input Impedance:
MM: 47k Ohms; MC: user selectable - 47, 100, 470, 1k Ohms
Gain:
MM: 40 dB; MC: 60 dB
Frequency Response:
MM: RIAA + / - 0.12 dB, 20 Hz - 20 kHz
MC: RIAA + / - 0.25 dB, 20 Hz - 20 kHz
Signal to Noise Ratio (S/N; A weighted):
MM: > 88 dB; MC: > 68 dB
THD:
MM: <0.0075 % @ 1 kHz; < 0.03%, 20 Hz - 20 kHz
MC: <0.006 % @ 1 kHz; < 0.08%, 20 Hz - 20 kHz
General
Power Source:
115 VAC or 230 VAC; auto-switching.
Power consumption: approximately 15 watts.
Standard IEC AC power inlet on rear panel.
(Removable / interchangeable power cord; included.)
Main AC Power rocker switch on rear panel.
Size and Weight:
Size: 1.75" high x 8.5" wide x 10" deep (including connectors).
Weight: 3 pounds (1.5 kg)
Page 14