Incline Feature; Pulse Grip Feature; Calorie Display; Folding And Unfolding Treadmill - Spirit Esprit CT80 Owner's Manual

Spirit esprit ct80 treadmill owner's manual
Table of Contents

Advertisement

Incline Feature

·
Incline may be adjusted anytime after belt movement.
·
The incline range is from 0 to 12 levels.
·
"
"
"
Press the
or
are also available to adjust the incline percent.
·
The display will indicate incline percent as adjustments are made.
·
Incline will remain in its position when display is turned off.

Pulse Grip Feature

The Pulse (Heart Rate) console window will display your current heart rate in beats per minute
during the workout. You must use both stainless steel sensors to display your pulse. Pulse value
displays anytime the upper display is receiving a Grip Pulse signal.

Calorie Display

Displays the cumulative calories burned at any given time during your workout.
Note: This is only a rough guide used for comparison of different exercise sessions, which
cannot be used for medical purposes.

Folding and Unfolding Treadmill

Folding
First, lift the back part of the frame board with your hand till you hear a light sound, which
means the folding system has been locked. Running board can't be turned to the opposite
direction now.
Unfolding
Put the folded treadmill in a capacious position when you want to run.
Transport
Carefully lift the treadmill at the rear roller area, grasping the two side end caps, and roll the
treadmill away.

Programmable Operations

This treadmill offers 24 present programs (P1,P2, P3......P24, see attachment). The first 14
preset programs (P1 to P14) are only for speed; the last 10 preset programs (P15 to P24) are a
combination on speed and incline. Be careful when using the last 10 present programs as they
are designed for advanced users. Children under 16 years of age are not recommended to use
the last 10 preset programs.
To Select a Program
·
Make sure the machine is in the stop position, single press 'clear/set' to enter into resetting
state. Press 'MODE' to choose desired program (P1,P2, .....P24), then press and release
'START' to begin the program with default values.
·
The speed window will now be showing the preset speed of the selected program.
·
Each program will continue 30 minutes. After every one minute program and speed can be
altered manually or automatically. 3 Seconds before the ending of program a buzzer will sound
three times, then the running belt will come to a stop.
"
to achieve desired level of effort.
11
FUNCTIONS
Three
Quick access key of 3, 6 and 9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents