Switching The Fan Off; Dimming/Switching The Cooktop Lighting On/Off; Power Management; Safety Switch-Off - Miele DAS 4920 Operating And Installation Instructions

Operation (manual mode)

Switching the fan off

 Push in the deflector plate.
The next time the deflector plate is
pulled out, the fan will operate at power
level 2 again.
 Or switch the fan off with the On/Off
control .
The  symbol will go out.
Dimming/Switching the
cooktop lighting on/off
 You can switch the cooktop lighting
on and off by pulling the deflector
plate out and pushing it in or by
pressing the lighting control .
The lighting will switch on at maximum
brightness.
 To change the brightness, press and
hold the lighting control  with the
lighting switched on. The brightness
will gradually dim until you release the
control.
 To increase the brightness, press and
hold the lighting control  again until
the desired level has been reached
and then release it.
28

Power management

The rangehood is fitted with a Power
management system. The Power
management system is designed to
help save energy. It ensures that the fan
power level is reduced automatically
and that the lighting is switched off.
- If the Booster setting has been
selected, the fan will automatically
switch to setting 3 after 5 minutes.
- From fan power levels 3, 2 and 1, the
power will be reduced by one level
after 2 hours and then in 30-minute
stages until the fan finally switches
off.
- The cooktop lighting will switch off
automatically after 12 hours.

Safety switch-off

If Power management has been
deactivated, the rangehood will switch
itself off automatically after 12 hours if it
has been left on (fan and cooktop
lighting).
 To switch it back on press the On/
Off  control or the lighting
control .