Selecting The Delayed Shutdown Time; Turning Off The Blower; Dimming/Switching The Cooktop Lighting On/Off; Safety Shut-Off - Miele DAS 4930 Operating And Installation Instructions

Selecting the delayed
shutdown time
It is advisable to run the blower for a
few minutes after cooking has finished.
This helps to neutralize any lingering
vapors and odors in the air.
It also reduces the risk of residues
accumulating in the ventilation hood
and any resultant odors.
The delayed shutdown function enables
the blower to continue running for a
pre-determined time before switching
itself off automatically.
 After you have finished cooking,
touch the delayed shutdown
control .
- Once: blower switches off after
5 minutes (5  lights up).
- Twice: blower switches off after
15 minutes ( 15 lights up).
- If you touch the delayed shutdown
control  again, the blower will
remain switched on ( will go out).

Turning off the blower

 Touching the control for the active
blower power level again switches
the blower off.
 The blower also switches off if you
push the deflector plate in.
Dimming/switching the
cooktop lighting on/off
 You can turn the cooktop lighting on
and off by pulling out the canopy and
pushing it in again or by touching the
light sensor .
 When the canopy is retracted, if you
simply want to switch the cooktop
lighting on, touch the On/Off
switch  first followed by the light
sensor .
The lighting will switch on at maximum
brightness. All 3 bars next to the light
sensor  light up.
 With the lighting switched on, press
and hold the light sensor . The
brightness will gradually dim until the
control is released.
 To increase the brightness, press and
hold the light sensor  again until
the desired level has been reached
and then release it.
 Alternatively, you can select 3
brightness levels by touching the bars
next to the light sensor .

Safety shut-off

If power management has been
deactivated, the blower and cooktop
lighting will switch off automatically
after 12 hours.
 Press the On/Off switch  to switch
them back on again.
Operation
23