Operation; Switching The Fan On; Selecting A Power Level; Run-On Time - Miele DA 3466 Operating And Installation Instructions

Switching the fan on

 Pull out the deflector plate. For
optimum extraction with minimum
noise levels, always pull the deflector
plate out to its full extent.
The fan will switch on at setting 2. The
 symbol and 2 will light up in the
power setting display.

Selecting a power level

For light to heavy cooking vapours and
odours, select from power levels 1 to 3.
For short periods of cooking food with
intensive vapours and a strong aroma,
e.g. when searing meat, select Booster
setting B.
 Select the power level you want by
pressing the  or  controls.
Reducing power down from the
Booster setting
If Power management is activated
(default setting), the fan automatically
switches back to level 3 after 5 minutes.

Run-on time

 It is advisable to run the fan for a few
minutes after cooking has finished.
This helps to remove any lingering
vapours and odours from the air.
It also reduces the risk of residues
accumulating in the rangehood and any
resultant odours.

Switching the fan off

 Turn off the fan by pushing the
deflector plate back in. The next time
the deflector plate is pulled out, the
range hood will switch on at setting 2
again.
 Press the On/Off touch control  to
switch the fan off.
The  symbol will go out.
Switching the cooktop lighting
on/off
The cooktop lighting can be switched
on and off independently of the fan.
 You can switch the cooktop lighting
on and off by pulling the deflector
plate out and pushing it in or by
pressing the lighting control .
The  symbol will light up when the
cooktop lighting is switched on.

Operation

17