Desa VUL18NR Owner's Operation And Installation Manual page 25

Control Knob in
On Position
Selector Toggle Switch (Optional
Hand-Held Remote Control)
Figure 35 - Setting the Selector Switch,
Control Knob and Flame Adjustment
Knob for Remote Operation
ON/OFF SERIES (MODEL HRC100)
Hold the control button on the hand-held
remote until burner turns on. Hold the con-
trol button again until burner turns off (see
Figure 36).
TO LOCK press both buttons on hand-held
remote control until light stops flashing. Hand-
held remote control is now locked. If the fire
is on it will be turned off automatically. In the
locked state, the light will not light up when any
button is pressed. TO UNLOCK press both
buttons together on hand-held remote control
until the light stops flashing. The hand-held
remote is now unlocked.
Indicator
Light
Figure 36 - On/Off Hand-Held Remote
Control Unit
THERMOSTAT SERIES (MODEL
HRC200)
The hand-held remote can be operated using
either the manual mode (MANU) or thermostatic
mode (AUTO) (see Figure 37). To select Fahr-
enheit/Centigrade mode display, carefully press
the ˚C/˚F mode button with the end of a paper
clip or similar blunt object.
Manual Mode
1. Press the POWER and LOCK buttons
together to turn on the hand-held remote
control.
122001-01C
OPERATION
REMOTE-READy MODELS
Flame Adjustment
Knob
ON
ON
OFF
OFF
REMOTE
REMOTE
Control
Button
www.desatech.com
Continued
2. Press the MANU button to turn on the
fireplace.
3. Press the POWER and LOCK buttons
together to turn off the fireplace.
Auto (Thermostatic) Mode
1. Press the POWER and LOCK buttons
together to turn on the hand-held remote
control.
2. Press AUTO button to select this mode.
3. Set the desired room temperature by
pressing the TEMP + or - buttons.
4. Press the POWER and LOCK buttons
together to turn off the fireplace
Note: Do not leave the hand-held remote in
the AUTO mode close to the fireplace. The
radiant heat from the fireplace will turn off the
fireplace. Ideally, place the hand-held remote
in the center of the room facing towards the
fireplace.
Note: Do not hold the hand-held remote for
a long time. Body temperature will affect its
operation in the AUTO mode.
Safety Features
When away from home for an extended period
of time or as a child safety feature to prevent
accidental ignition of the fireplace, the receiver
ON/OFF/REMOTE switch should be in the
OFF position.
Digital Display Shows
Locks
Temperature and Settings
System to
Prevent
Accidental
Ignition
ROOM
TEMP
Turns
LOCK
Burners
On or
MANU
Off
Increases or
Decreases
Room
Temperature in
AUTO Mode
Figure 37 - Thermostat Hand-Held
Remote Control Unit
Turns
Hand-Held
Remote On
AUTO
SET
TEMP
or Off and
Allows You
TEMP
to Choose
POWER
the Manual
Setting
AUTO
ºC/ºF
Selects
AUTO
Mode
°C/°F Mode
Button
25