Installation - HIKVISION DS-2CC52C1S-VPIR User Manual

2 Installation

Before you start:
 Please make sure that the device in the package is in good
condition and all the assembly parts are included.
 Make sure that all the related equipment is power-off during the
installation.
 Check the specification of the products for the installation
environment.
 Check whether the power supply is matched with your AC outlet
to avoid damage.
 Please make sure the wall is strong enough to withstand three
times the weight of the camera and the mounting.
 If the wall is the cement wall, you need to insert expansion screws
before you install the camera. If the wall is the wooden wall, you
can use self-tapping screw to secure the camera.
 If the product does not function properly, please contact your
dealer or the nearest service center. Do not disassemble the
camera for repair or maintenance by yourself.
For the camera that supports IR, you are required to pay attention to
the following precautions to prevent IR reflection:

Dust or grease on the dome cover will cause IR reflection.
Please do not remove the dome cover film until the
installation is finished. If there is dust or grease on the dome
720P SDI Camera·User Manual
17