HIKVISION DS-2CC52C1S-VPIR User Manual page 21

4. Adjust the Lens to the required surveillance angle.
Adjust the pan direction [0°~180°].
1).
Adjust the tilt direction [0°~75°].
2).
Rotate the camera [0~360°] to adjust the lens
3).
Tighten the tilt lock screw to complete the installation.
4).
As the lens has already been factory adjusted to the best imaging
effect, you just need to adjust the panning position and tilting
position to get the desired surveillance angle.
5. Reinstall the bubble and tighten the screws to complete the
installation.
720P SDI Camera·User Manual
Figure 2-4 Angle Adjustment
20