HIKVISION DS-2CC52C1S-VPIR User Manual page 8

 Do not aim the camera at the sun or extra bright places. Blooming
or smearing may occur otherwise (which is not a malfunction),
and affect the endurance of sensor at the same time.
 The sensor may be burned out by a laser beam, so when any laser
equipment is in using, make sure that the surface of sensor will
not be exposed to the laser beam.
 Do not place the camera in extremely hot, cold (the operating
temperature shall be(-10℃~+60℃), dusty or damp locations, and
do not expose it to high electromagnetic radiation.
 To avoid heat accumulation, good ventilation is required for
operating environment.
 Keep the camera away from liquid while in use.
 While in delivery, the camera shall be packed in its original
packing, or packing of the same texture.
 Improper use or replacement of the battery may result in hazard
of explosion. Replace with the same or equivalent type only.
Dispose of used batteries according to the instructions provided
by the battery manufacturer.
720P SDI Camera·User Manual
7