HIKVISION DS-2CC52C1S-VPIR User Manual page 7

the IEC60950-1 standard. Please refer to technical specifications
for detailed information.
 Do not connect several devices to one power adapter as adapter
overload may cause over-heating or a fire hazard.
 Please make sure that the plug is firmly connected to the power
socket.
 When the product is mounted on wall or ceiling, the device shall
be firmly fixed.
 If smoke, odor or noise rise from the device, turn off the power at
once and unplug the power cable, and then please contact the
service center.
 If the product does not work properly, please contact your dealer
or the nearest service center. Never attempt to disassemble the
camera yourself. (We shall not assume any responsibility for
problems caused by unauthorized repair or maintenance.)
Cautions
 Make sure the power supply voltage is correct before using the
camera.
 Do not drop the camera or subject it to physical shock.
 Do not touch senor modules with fingers. If cleaning is necessary,
use clean cloth with a bit of ethanol and wipe it gently. If the
camera will not be used for an extended period, please replace
the lens cap to protect the sensor from dirt.
720P SDI Camera·User Manual
6