Preparing The Building-In Niche; Assembly Parts - Miele KF 1801 Vi Operating And Installation Instructions

Installation
^ Do not remove the installation aids
from the appliance doors. These will
be required later when the appliance
is installed in the building-in niche.
^ Check the appliance for damage
during transportation.
Do not install a damaged appliance!
^ Unscrew the bracket that is holding
the appliance to the delivery pallet.
,
Warning!
Please bear in mind that the
appliance is no longer secured to the
pallet!
^ With the help of several people as
required, carefully lift the appliance
from the pallet, starting with the back
of the appliance.
74
The appliance can be rolled along the
floor using the wheels at the back.

Preparing the building-in niche

,
Keep the door and drawer to the
appliance closed until it is fixed
inside the building-in niche.
Due to sheer size and weight of the
appliance, it needs to be ensured
that it cannot tip forwards once it is
built into the niche.

Assembly parts

All the fixings required for installation
are supplied with the appliance. The
plastic bags are marked with letters for
easy identification.
Each fitting stage is indicated by the
letter on the bag needed for that stage.
^ Use the torx screwdriver supplied to
tighten the screws.