Alarm - Miele KF 1801 Vi Operating And Installation Instructions

Your appliance has been fitted with a
warning system which ensures that the
temperature in the appliance cannot
rise unnoticed and to avoid energy
being wasted if a door is left open.
Activating the alarm system
The alarm system is always active. It
does not have to be switched on
manually.
Temperature alarm
If the temperature in one of the zones
gets too warm, the sensor for the zone
concerned will flash in the control
panel.
The Alarm off sensor will flash at the
same time.
An audible alarm will also sound.
If the temperature rises in the freezer,
the temperature display will show the
highest temperature that was reached
during the time the temperature in the
freezer rose.
The alarm will sound and the relevant
symbol will flash, for example,
– if the freezer door has been left open
for a while, e.g. in order to load,
re-arrange or take food out.
– when freezing large amounts of food
at once.
– in the event of a power cut.
The alarm will stop and the Alarm off
sensor in the display will go out again
as soon as the temperature has
dropped down to the correct level
again. The sensor for the zone
concerned will constantly light up.
Switching the temperature
alarm off early
If the noise disturbs you, you can
switch the alarm off early if you wish.
^ Touch the Alarm off sensor.
The alarm will stop.
The Alarm off sensor will continue to
be lit up until the temperature has
dropped down to the correct level
again.
However, if the temperature in the
freezer section remains above
-18 °C for a long time, check that the
frozen food has not started to
defrost. If it has, check that the food
is safe to use and if it is, then use it
as soon as possible.

Alarm

23