Miele KF 1801 Vi Operating And Installation Instructions page 52

Problem solving guide
Top lighting:
^ Hold the lamp cover at the front with
both hands and push it back.
^ Then lift the lamp cover forwards to
remove.
Do not touch halogen lamps with
your bare fingers.
Use a soft cloth when changing a
halogen lamp.
^ Pull the defective halogen lamp out.
^ Fit the new lamp into the holder.
The following type of halogen lamp is
required:
20 W/12 V/ GY 6.35 cap.
^ Engage the lamp cover at the back,
then pull it forward and click it into
place at the front.
52
Side lighting:
^ Turn the lamp cover anti-clockwise to
remove it.
Do not touch halogen lamps with
your bare fingers.
Use a soft cloth when changing a
halogen lamp.
^ Pull the defective halogen lamp out.
^ Fit the new lamp into the holder.
The following type of halogen lamp is
required:
5 W/12 V/ G 4 cap.
^ Replace the lamp cover, turning it
clockwise as far as it will go.
^ Reconnect the appliance to the
electricity supply and switch it on.