Switching Off - Miele KF 1801 Vi Operating And Installation Instructions

Switching on and off
The On/Off sensor for the ice cube
maker appears on the right-hand side
of the control panel (only visible if the
freezer zone has been selected).
If the ice cube maker is in operation,
the sensor is highlighted in yellow.
To select settings for your appliance
(e.g. to set the temperature, etc.),
^ touch the sensor for the particular
zone of the appliance where you
would like to select the settings.
The applicable sensor will then be
highlighted in yellow, and depending
on the zone, further settings which may
be selected will now appear in the
display.
Depending on which zone you have
selected, you can
– adjust the temperature,
– select the Supercool/SuperFreeze
functions,
– select the humidity level in the
MasterFresh zones,
– switch on the ice cube maker.
Please refer to the relevant section for
more information.
16
To switch off a section again,
^ touch the sensor of the selected zone
again so that it is highlighted in white,
or select a different sensor.
To leave settings mode,
^ touch the access sensor so that it is
highlighted in white.
Your last selected settings will now be
saved to memory.
If you do not touch the access sensor,
the electronics for accessing the
settings will switch off after a period.

Switching off

^ Press the rocker switch.
The cooling system and the lighting are
now switched off.