Securing And Aligning The Furniture Door - Miele KF 1801 Vi Operating And Installation Instructions

Installation
Securing and aligning the
furniture door
^ Insert the angle trim as far as it will
go into the spaces in the frame, as
shown.
^ Open the appliance door and hang
the furniture front on its frame onto
the threaded bolts, as shown p.
^ Press the pieces of angle trim on
both sides into the white plastic
84
frame, and screw them down
securely.
^ Screw the nuts q loosely onto the
threaded bolts - but do not tighten
yet.
^ Close the door and check the
distance between the door and
neighbouring furniture doors.
^ Align the appliance door to the side
by sliding it over the threaded bolts.
^ Align the depth of the door via the
gaps in the angle trim. Then screw
the angle trim into position.
^ Now screw on the top nuts. The door
is now fixed.
Repeat the steps from "Preparing
the furniture fronts" to fit the furniture
front to the freezer drawer.
The positioning of the freezer drawer
front must be aligned to that of the
refrigerator door front.