ADJ Inno Pocket Roll User Instructions page 12

Inno Pocket Roll
BLND -
Blackout or Stand by mode.
1. Press the MENU button until "BLND" is displayed, press
ENTER. Either Yes or No will be displayed.
2. To activate Blackout tap the UP or DOWN buttons until "Yes"
is displayed, press ENTER to confim. The fixture will now be in
Blackout mode. To deactivate Blackout mode, select "No" and
press Enter.
LED -
With this function you can have the LED display
turn off after 10 seconds.
1. Press the MENU button until "LED" is displayed, press
ENTER.
2. The display will show either "ON" or "OFF". Press the UP or
DOWN buttons to select "ON" to keep the LED display on at
all times, or "OFF" to switch to have the LED display switch off
after 10 seconds.
3. Press ENTER to confirm. To make the LED display reappear
after it has turned off, press any button.
DISP -
This function will reverse the display 180º.
1. Press the either the MENU button until "DISP" is displayed,
press ENTER.
2. Press the UP button to select "DSIP" to "flip" the display, or
"DISP" to change the display back.
3. Press ENTER to confirm.
PAN -
Pan Inversion
1. Press the MENU button until "PAN" is displayed, press
ENTER. Either Yes or No will be displayed.
2. To activate the Pan inversion press the UP or DOWN buttons
ADJ Products, LLC - www.adj.com - Inno Pocket Roll Instruction Manual Page 11
System Menu Inno Pocket Roll
until YES is displayed, press ENTER to confim. To deactivate
Pan inversion, select NO and press Enter.
TILT -
Tilt Inversion
1. Press the MENU button until "TILT" is displayed, press
ENTER. Either YES or NO will be displayed.
2. To activate the Tilt inversion press the UP or DOWN buttons
until YES is displayed, press ENTER to confim. To deactivate
Tilt inversion, select NO and press Enter.
TEST
- This function will run a self test program. The test
program will test pan/tilt movement and colors.
1. Press the MENU button until "TEST" is displayed, press
ENTER.
2. The fixture will now run a self test. Press MENU to exit.
TEMP
- With this function you can check the temperature
of the fixture.
1. Press the MENU button until "TEMP" is displayed, press
ENTER.
2. The temperature of the fixture will now be displayed. Press
MENU to exit.
FHRS
- With this function you can display the running
time of the unit.
1. Press the MENU button until "FHRS" is displayed, press
ENTER.
2. The running time of the fixture will now be displayed. Press
MENU to exit.
ADJ Products, LLC - www.adj.com - Inno Pocket Roll Instruction Manual Page 12
System Menu