ADJ Inno Pocket Roll User Instructions page 11

Inno Pocket Roll
VER
- With this function you can display the software ver-
sion of the unit.
1. Press the MENU button until "VER" is displayed, press
ENTER.
2. The software version will now be displayed. Press MENU to
exit
RSET
- Use this function to reset the unit.
1. Press the MENU button until "RSET" is displayed, press
ENTER.
2. The fixture will now reset.
ADJ Products, LLC - www.adj.com - Inno Pocket Roll Instruction Manual Page 13
System Menu Inno Pocket Roll
press and hold the MENU button for at least 3 seconds to acti-
vate. After you have set your desired show, it can be changed
at any time using the UP or DOWN buttons.
SOUN -
Sound Active mode.
1. Press the MENU button until "SOUN" is displayed, press
ENTER.
2. The display will show either "ON" or "OFF". Press the UP or
DOWN buttons to select "ON" to activate sound active mode,
or "OFF" to deactivate sound active mode.
3. Press ENTER, then press and hold the MENU button for at
least 3 seconds to activate.
SENS -
In this mode you can adjust the sound sensitiv-
ity.
1. Press the MENU button until "SENS" is displayed, press
ENTER.
2. A number between 0-100 will be displayed. Press the UP or
DOWN buttons to adjust the sound sensitivity. 0 being the least
sensitive, and 100 being the most sensitive.
3. When you have found your desired setting press ENTER to
confirm.
DIND -
In this mode you can select the dimmer curve.
1. Press the MENU button until "DIND" is displayed, press
ENTER.
2. The current dimmer curve setting will be displayed.
3. Press the UP or DOWN buttons to find your desired dimmer
curve and press ENTER to confirm. See the Dimmer Curve Chart
on page 19 for more information.
ADJ Products, LLC - www.adj.com - Inno Pocket Roll Instruction Manual Page 10
System Menu