4 STAGE PAK Table of Content Unpacking..............3 General Information............3 Features.................3 4 STAGE PAK Registration..............3 Operation Instructions..........4-5 DMX Set Up..............6-7 Cleaning.................8 Trouble Shooting............8 Specifi cations..............9 Contact................9 User Instructions...
- Power Supply: 100-240V AC/47 – 63Hz 4 STAGE PAK Product Registration The 4 STAGE PAK carries a three year (1095 day) limited warranty. Please ll out the enclosed warranty card to validate your purchase. DIP10: ON All returned service items whether under warranty or not, must be DIP9: OFF freight pre-paid and accompany a return authorization (R.A.) number.
Data Cable (DMX Cable) Requirements (For DMX and Master/Slave Ope- ration): The 4 STAGE PAK can be controlled via DMX- 512 protocol. The 4 STAGE PAK can be either a 8 or 10 channel DMX unit. The DMX address is set electronically using the controls on the front panel of the unit.
3 of a male XLR connector (DATA + and DATA -). This unit is inserted in the female XLR connector of the last unit in your daisy chain to terminate the line. Using a cable terminator (ADJ part number Z-DMX/T) will decrease the possibilities of erratic behavior.
4 STAGE PAK Specifications Model: 4 STAGE PAK Voltage*: 100-240V AC/47 – 63Hz LEDs: Each PAR has 36W (36x1W) LED Power (12 x Red, 12x Green, 12 x Blue) Power Consumption: 18W max. Dimensions: 280x260x260mm Weight: 2,56 kg Duty Cycle:...
Need help?
Do you have a question about the 4 STAGE PAK and is the answer not in the manual?
Questions and answers