Basic Maintenance Made Easy - Webb Werr17 Operator's Manual And Parts List

Basic maintenance made easy.

WARNING! If your mower is not serviced correctly, you could reduce
your mower's ability to operate and void warranty.
1. Spark plug.
Firstly, wait until the engine has cooled
before disconnecting the spark plug cover
and then remove the spark plug with the
box spanner supplied. If it is dirty, you can
clean the plug with a wire brush.
For best results we advise you to replace
the spark plug after 100 hours of use. The
replacement spark plug is NGK BR2LM.
When refitting the spark plug do not over-
tighten. If adjusting yourself, note the spark
plug gap must be set to 0.75mm.
2. Air filter.
Ensure the engine is cool, unscrew the top
air filter nut, lift up the cover and remove
the air filter element. Put the cover back on the
housing immediately to prevent any objects
falling into the air intake.
Either carefully brush off any excess dirt
particles, or replace the air filter with a new
one. To protect your warranty, only use
a genuine B&S air filter. We recommend
that you replace the air filter after every 12
months of regular usage. When the air filter
has been cleaned or replaced, screw-in the
cover, taking care not to over-tighten.
User's manual 11