Using Touch Control - Zte Spro 2 User Manual

• F rom the HOME tab of the home screen, tap
• I f the projector floating button is enabled, tap
NOTE: For best results, project at a right angle onto a non-reflective white flat
surface 6.6 feet to 16.4 feet from your ZTE Spro 2. See Projection for more
information on using the ZTE Spro 2 as a projector.
WARNING!
Do not look directly into the projection lens or point the lens toward people or
animals' eyes when the projector is on, as this may cause injury to the eyes.

Using Touch Control

Your ZTE Spro 2's touch screen enables you to control actions through a variety of
touch gestures.
Tap
When you want to type using on-screen keyboards, select
items on the screen such as application and settings
icons, or press the on-screen buttons, simply tap them
with your finger.
Press and Hold
To open the available options for an item (for example, a
message or link in a web page), press and hold the item.
6
on the Projector tile.
> Projector off or Projector on.
Swipe or Slide
To swipe or slide means to quickly drag your finger
vertically or horizontally across the screen.
Drag
To drag, press and hold your finger with some pressure before
you start to move your finger. While dragging, do not release
your finger until you have reached the target position.
Pinch
In some apps (such as Maps, Browser,
and Gallery), you can zoom in and out by
placing two fingers on the screen at once
and spreading them apart (to zoom in) or
pinching them together (to zoom out).
Rotate the screen
For most screens, you can automatically change the screen orientation between
landscape and portrait by holding the device upright or turning it on its side.
NOTE: The Auto-rotate screen check box needs to be selected for the screen
orientation to automatically change. Tap
Auto-rotate screen.
You can also access the screen rotation control by swiping down on the status bar
and tapping Auto Rotate.
> SETTINGS > Device > Display >
7