Zte Spro 2 User Manual page 19

Method one: WPS button (Recommended)
> SETTINGS > Network > Wi-Fi.
Tap
Slide the Wi-Fi switch to the ON position.
Tap .
Press the WPS button on the wireless router and the access point will recognize
your ZTE Spro 2 and add it to the network.
Method two: PIN of ZTE Spro 2 Smart Projector
Tap > SETTINGS > Network > Wi-Fi.
Slide the Wi-Fi switch to the ON position.
Tap > WPS Pin Entry.
The WPS PIN displays on the screen. Enter the PIN into the access point's
setup page.
After entering the PIN, your ZTE Spro 2 automatically finds the access point and
configures the connection.
Method three: PIN of the access point
Tap > SETTINGS > Network > Wi-Fi.
Slide the Wi-Fi switch to the ON position.
Tap a WPS-capable access point. It has a
In the window that opens, check Show advanced options.
Tap the field below WPS PIN from access point and select Enable.
Enter the PIN of the access point and tap Connect. You can find the PIN on the
configuration page of the access point.
NOTE: For detailed information about the WPS feature of the access point, please
refer to its user documents.
28
icon next to its name.
Adjusting Advanced Wi-Fi Settings
> SETTINGS > Network > Wi-Fi.
Tap
Tap > Advanced to adjust the following settings.
• N etwork notification: Get notifications in the status bar when Wi-Fi is on and
an open network is available.
• Keep Wi-Fi on during sleep: Set whether to keep Wi-Fi on in sleep mode.
• S canning always available: Allow Google's location service and other apps to
scan for networks, even when Wi-Fi is turned off.
• Avoid AP without Internet: Only use Wi-Fi networks that have Internet
connection.
• C onnect to AT&T Wi-Fi spot: Automatically connect to AT&T Wi-Fi hotspots
when they are available.
• W i-Fi band: Select the Wi-Fi frequency band according to the available Wi-Fi
networks.
• Install certificates: Install certificates from the internal storage or the external
microSD card. Some Wi-Fi networks need to find the correct certificates to
grant you access.
• W i-Fi optimization: Minimize battery usage when Wi-Fi is on.
• M AC address: Check the MAC address.
• IP address: Check the IP address.
29