For Your Safety; General Safety; Radio Frequency (Rf) Energy - Zte Spro 2 User Manual

Smart projector
Hide thumbs Also See for Spro 2:
Table of Contents

Advertisement

For Your Safety

General Safety

Your device can
produce a loud sound.
Avoid contact with
anything magnetic.
Keep away from
pacemakers and other
electronic medical
devices.
Turn off when near
explosive materials or
liquids.
Only use approved
accessories.
Don't take your device
apart.
64
Don't use at gas stations.
Your device may produce a
bright or flashing light.
Don't dispose of your device
in fire.
To prevent possible hearing
damage, do not listen at
high volume levels for long
periods.
Avoid extreme temperatures.
Avoid contact with liquids.
Keep your device dry.

Radio Frequency (RF) Energy

This device is designed and manufactured not to exceed the emission limits for
exposure to radio frequency (RF) energy set by the Federal Communications
Commission of the United States.
During SAR testing, this device is set to transmit at its highest certified power level
in all tested frequency bands, and placed in positions that simulate RF exposure in
usage against the head with no separation, and near the body with the separation
of 10 mm. Although the SAR is determined at the highest certified power level, the
actual SAR level of the device while operating can be well below the maximum
value. This is because the device is designed to operate at multiple power levels so
as to use only the power required to reach the network. In general, the closer you
are to a wireless base station antenna, the lower the power output.
The exposure standard for wireless devices employs a unit of measurement
known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC
is 1.6 W/kg.
Tests for SAR are conducted using standard operating positions accepted by the
FCC with the device transmitting at its highest certified power level in all tested
frequency bands.
The FCC has granted an Equipment Authorization for this model device with
all reported SAR levels evaluated as in compliance with the FCC RF exposure
guidelines. SAR information on this model device is on file with the FCC and can be
found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching
on FCC ID: SRQ-MF97B.
For this device, the highest reported SAR value for usage near the body is 1.421 W/kg.
The highest reported SAR value for simultaneous transmission is 1.48 W/kg.
While there may be differences between the SAR levels of various devices and at
various positions, they all meet the government requirement.
SAR compliance for body operation is based on a separation distance of 15 mm
between the unit and the human body. Carry this device at least 15 mm away from
your body to ensure RF exposure level compliant or lower to the reported level.
To support body-worn operation, choose the belt clips or holsters, which do not
65

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents