Getting Started; Setting Up - Zte Spro 2 User Manual

vi

Getting Started

Setting Up

Installing a microSD Card (not included) or micro-SIM Card
You do not need to turn off the ZTE Spro 2 to install or remove the microSD or
micro-SIM card. However, before removing the microSD card when the device is on,
you need to unmount it. See Removing the microSD Card From Your ZTE Spro 2.
NOTES:
Some applications may require a microSD card to work properly if it stores certain
data on it. Therefore, it is recommended that you keep a microSD card installed
and do not remove or replace it unnecessarily.
The micro-SIM card is already installed. If you need to swap micro-SIM cards, the
process is similar to microSD card installation.
Turn your ZTE Spro 2 upside down. Push the point of the microSD/micro-SIM
pin into the hole on the microSD card slot.
1