Disassembly/Reassembly Of Carpet; Removal Step; Installation Step - Chery QQ6 Service Manual

IV. Disassembly/Reassembly of
Carpet
Tool: flat head screwdriver, cross head
screwdriver; sleeve

1. Removal Step

1.1. Remove the seat. (See Disassembly of
Seat)
1.2. Remove the scuff plate, lower trims of B
and C pillars.
(See Disassembly of B and C Pillars)
1.3. Remove the A pillar lower trim.
1.4. Remove the armrest box and console. (See
Disassembly of Armrest Box and Console)
1.5. Prize the cover on the driver pedal with flat
head screwdriver.
1.6. Remove two fixing nuts from the driver's
pedal with a socket wrench, and then take off
the pedal.
Installation torque: 7±1N.m
1.7 Take off the carpet after Pull off the carpet
connectors

2. Installation Step

2.1. Place the carpet into the vehicle, tightedly
press the carpet near the central passage, and
expose the corresponding hole from the carpet
hole, and lay the carpet reliably.
2.2. Lay the left central rear part of carpet
according to the shape of the vehicle bottom,
and reveal the installation holes of front left
seat and lay the carpet reliably.
22