Chery QQ6 Service Manual page 140

2. Removal of harness at right side of interior floor.
2.1.1. Remove the glove case. (See
Disassembly/Reassembly of Instrument Panel)
2.1.2. Pull out the connector of front right door
harness.
2.1.3. Remove the right B pillar trim. (See
Disassembly/Reassembly of Seat Belt)
2.1.4. Pull out the connector of front right door contact
switch.
2.1.5. Pull out the connectors A and B of rear right
door harness.
2.1.6. Pull out the connector of auxiliary seat belt
switch.
2.1.7. Pull out the connector of rear right wheel speed
sensor .
140