Disassembly/Reassembly Of Rear Defroster Harness; (I). Preparation; (Ii). Precautions; (Iii). Removal Procedure - Chery QQ6 Service Manual

IV. Disassembly/Reassembly
Defroster Harness
Defroster harness
S21-3724530
Defroster harness
S21-3724540

(I). Preparation

Tools:
socket wrench, cross screwdriver, flat head screwdriver

(II). Precautions

Power OFF before the electrical elements and
harnesses are removed.
The ignition switch must be in OFF state.

(III). Removal Procedure

1. Removal of Defroster Positive Harness
1.1.1、 Pull out the connector of rear defroster
positive harness, and the connector to the
high-mount
Disassembly/Reassembly
Harness)
1.1.2. Two connectors to back door harness. (Since the
circuit is a printed one, there is no actual harness.)
1.2 Installation
Install it in the reverse order of removal
2. Removal of Defroster Negative Harness
2.1.1. Remove the back door Inner ornament plate.
(See Disassembly/Reassembly of Luggage Boot)
2.1.2. Remove the defroster negative connector and
grounding point.
2.2 Installation
Install it in the reverse order of removal.
of
positive (+), part
negative (-), part
stop lamp circuit.
of Dack
Rear
number:
number:
(See
Door
171