Cd-Rom/Dvd-Rom Drive - Panasonic CF-72 Series Reference Manual

Hide thumbs Also See for CF-72 Series:
Table of Contents

Advertisement

CD-ROM/DVD-ROM Drive

Usage Precautions
Installing/Removing a CD-ROM/DVD-ROM Drive
Do not leave the tray in the open position or touch the lens area. Should the lens
become soiled by dust or dirt, the unit may not read discs properly.
Do not apply excessive force to the tray in the open position, doing so could damage
the tray.
Do not place items other than discs on the tray.
Under some conditions, dust may build up on the optical lens or disc, possibly result-
ing in malfunction.
Do not expose the CD-ROM/DVD-ROM drive to oily or tobacco smoke. Doing so
could shorten the service life of the lens.
Do not use discs that have become deformed (warped, not completely round, etc.).
Never insert foreign objects such as paper clips into the slot in the CD-ROM/DVD-
ROM drive.
Do not open the CD-ROM/DVD-ROM drive or move the computer while the CD-ROM/
DVD-ROM drive is being accessed. Doing so could cause it to malfunction. In addi-
tion, after running an application involving access to a disc, do not open the CD-ROM/
DVD-ROM drive or remove the disc until after the application has been closed.
After closing the tray, do not attempt to access a disc until the MP indicator (
off.
Cleaning the CD-ROM/DVD-ROM drive using a disc lens cleaner (except a liquid type
cleaner) is recommended if it malfunctions.
When using Panasonic's CF-VDD712 DVD-ROM drive, set [CD Drive Speed] in the
Setup Utility to [Low]. If [Low] is not set, the computer may malfunction.
To avoid damaging discs:
Do not allow discs to become dirty or scratched.
Do not place or store discs in locations exposed to heat, direct sunlight, humidity or
dust.
If the disc is brought from a cold into a warm environment, moisture may form on the
disc. Wipe this moisture off with a soft, dry, lint-free cloth before using the disc.
Do not touch the data surface (the side opposite the side with the title printed on it) as
it can cause the disc to become dirty or scratched.
Do not write on the surface of the disc with a ball-point pen or other writing instrument.
Do not drop, bend, or place heavy objects on top of discs.
Cleaning the disc using a disc cleaner is recommended once every 2 or 3 months.
If the disc gets dirty
page 31
After wiping the disc with a moist, soft
cloth, wipe it with a dry cloth. Always wipe
from the center toward the edge.
33
) goes

Advertisement

Table of Contents
loading

Table of Contents